2717-0713 :pISSN

2717-0713 :eISSN

Advanced Materials and Structures

  • Editor-in-Chief: Alireza Akbari
  • Publication Period: Quarterly
  • This is an Open Access Journal
Advanced Materials and Structures (AMS), a peer-reviewed quarterly international journal, publishes original research achievements on: 1- Microstructure-process-property-performance relations in, and 2- Design, synthesis, and manufacturing of advanced engineering materials, components and structures with enhanced mechanical or functional performance. The papers submitted to the Advanced Materials and Structures should demonstrate how an understanding the undelaying basic chemical and physical phenomena encountered in development of materials microstructure and processing/manufacturing route may direct designing new materials and structures with desired features and properties. The enhanced performance should be evidenced through theoretical calculations, physical/mathematical modeling, computer simulations and advanced characterization techniques. All simulations should be validated and supported via experimental results. The journal covers broad class of constructional, structural, bio- (bioinert/bioactive), nano- (1, 2-D and 3-D, nanocrystalline and nanocomposite) and functional materials including metallic, ceramic, polymeric, intermetallic, amorphous and composite materials designed/synthesized/produced via conventional and modern manufacturing processes such as additive manufacturing, laser and plasma assisted technologies.

Contact information for the journal office
Journal Address Sahand University of Technology, Tabriz, Iran.
Journal Number +98-41-33459416
E-mail Address ams@sut.ac.ir

Peer-review process
All submitted articles are evaluated at the submission to meet the structural and subject principles of Advanced Materials and Structures (AMS). The matched articles will gone under a double-blinded peer-review process by at least 3 reviewers (expert in the field who are not part of the journal’s editorial staff) who are selected by the Editorial Board members according to their field specialties. The Editorial Board members have the final responsibility to select the articles.
Governing body
Advanced Materials and Structures (AMS) is under the scientific control of Editorial Board whose members are recognized experts in the subject areas included within the journal’s scope. Some executive roles of the Editorial Board members are delegated to the Editor-in-Chief who is well-known in the journal’s scope.
Editorial team
Advanced Materials and Structures (AMS) is under the scientific supervision of the Editorial Team whose members are all experts with high number of publications in their field.
Author fees/Access
There are No Fees or Charges at all for submission, reviewing and publishing processes in Advanced Materials and Structures (AMS).
Advanced Materials and Structures (AMS) follows the Bethesda Statement on Open Access Publishing.
The content of Advanced Materials and Structures (AMS) is under the Creative Commons Attribution-NonCommercial 4.0 International Public License. To the extent this Public License may be interpreted as a contract, we are granted the Licensed Rights in consideration of your acceptance of these terms and conditions, and the Licensor grants you such rights in consideration of benefits the Licensor receives from making the Licensed Material available under these terms and conditions.
Process for identification of and dealing with allegations of research misconduct
Publisher and editors of Advanced Materials and Structures (AMS) are reasonable to identify and prevent the publication of papers where research misconduct has occurred, including plagiarism, citation manipulation, and data falsification/fabrication, among others. In doing so, Advanced Materials and Structures (AMS) follows COPE’s guidelines in dealing with allegations.
Ownership and management
Advanced Materials and Structures (AMS) is owned by Eureka American, Iran, and is managed and published by YektaPub Co.
Conflicts of interests
All Advanced Materials and Structures (AMS) Editorial Board members and the Editor-in-Chief submitted articles are gone under the same reviewing process as the other authors gone. In the cases that a reviewer suspects undisclosed conflict of interest in a submitted manuscript or a reader suspects undisclosed conflict of interest in a published article (all authors are filling the ICMJE Form for Disclosure of Potential Conflicts of Interest at the submission time) Advanced Materials and Structures (AMS) will follow COPE’s guidelines.
Revenue sources/Advertising/Direct marketing
Advanced Materials and Structures (AMS) is financially supported completely by Eureka American, Iran, and has no other sources for earning funds. Advanced Materials and Structures (AMS) accepts No advertisements in the site or even as a report article.
Publishing schedule/Archiving
Advanced Materials and Structures (AMS) is published 4 issues per year. All the content from the beginning to the end will be available for ever on Advanced Materials and Structures (AMS) exclusive website. Also Advanced Materials and Structures (AMS) is included at EBSCOhost and has the plan to enter to Scopus and Thomson-Reuters databases.


This license lets others remix, tweak, and build upon your work non-commercially, and although their new works must also acknowledge you and be non-commercial, they don’t have to license their derivative works on the same terms.
View License Deed | View Legal Code

Managing Editor: Prof. F. Abbasi, Sahand University of Technology, Tabriz, Iran
Editor-in-Chief: Prof. A. Akbari, Sahand University of Technology, Tabriz, Iran
Editorial Board:
Prof. H. Assadi, Brunel University, London, England
Prof. A.A Babalou, Sahand University of Technology, Tabriz, Iran
Prof.  A. Çelik, Ataturk University, Erzurum, Turkey
Prof. T.N. Chakherlou, University of Tabriz, Tabriz, Iran
Prof. M.R. Chenaghlou, Sahand University of Technology, Tabriz, Iran
Prof. K. Dehghani, Amirkabir University of Technology, Iran
Prof. B. Eghbali, Sahand University of Technology, Tabriz, Iran
Prof. M. Haghighi, Sahand University of Technology, Tabriz, Iran
Prof. S. Hosseinnedjad, Sahand University of Technology, Tabriz, Iran
Prof. M.G. Kakroudi, University of Tabriz, Tabriz, Iran
Prof. J. Khalil-allafi, Sahand University of Technology, Tabriz, Iran
Prof. F. Nasirpouri, Sahand University of Technology, Tabriz, Iran
Prof. L. Pichon, University of Poitiers, Poitiers, France
Prof. M. Rezaei, Sahand University of Technology, Tabriz, Iran
Prof. S.K. Sadrnezhad, Sharif University of Technology, Tehran, Iran
Dr. T. Saeid, Sahand University of Technology, Tabriz, Iran
Prof. S.A. Sajadi, Ferdowsi University of Mashhad, Mashhad, Iran
Prof. A. Shojaei, Sharif University of Technology, Tehran, Iran
Description of the AMS journal

Advanced Materials and Structures (AMS) publishes original research papers, short communications and review articles on microstructure-process-property-performance relations in, and design, synthesis, and manufacturing of advanced engineering materials, components and structures with enhanced mechanical or functional performance. The AMS journal is multi-disciplinary in nature. The papers submitted to the AMS should demonstrate how an understanding the undelaying basic chemical and physical phenomena encountered in development of materials microstructure and processing/manufacturing route may direct designing new materials and structures with desired features and properties. The enhanced performance should be evidenced through theoretical calculations, physical/mathematical modelings, computer simulations and advanced characterization techniques. All simulations should be validated and supported via experimental results.
Guide for Authors
Types of paper
AMS publishes Full Length Research Articles, Short Communications and Review Papers.
Full Length Research Articles
This type of papers refers to original research articles written based on the results obtained during an innovative research investigation, conducted in considerable depth, with critical analysis and discussion of the results to establish connections between advanced materials microstructure/properties, design/manufacturing and performance validated at the material and structural level.
Short communications
This type of papers covers research reports of immediate value. There are no limitations on word count and figure number but the total length of the article should not be exceeded 4 printed pages.
Review articles
This type of articles only acceptable from the authors who have already published considerable number of contributions on the topic. In the review papers, it is asked the authors to provide a review on the state of art of the subject with a critical assessment of methods, approaches, published results and their reliability by contributing to the consolidation of knowledge in the relevant area.
Length of papers
Each type of the papers should have predetermined printed pages including references and appendices (if any), according to the Table 1. All papers should contain an abstract from 100 to 300 word count depending on the paper type as specified in Table 1.
Table 1. Paper and Abstract length.
Paper type Paper (printed pages) Abstract (word)
Full Length Research Articles 8-12 200
Short Communications 3-4 100
Review Papers Up to 50 Up to 300
Novelty statement
To start the peer-review process on submitted manuscripts uploading a novelty statement in a separate page is mandatory. In this file the authors should explain the novelty and originality of research work and its scientific contribution beyond previously published papers.
Submitting three to five bullet points highlights are mandatory. Each bullet points should contain maximum number of characters including spaces. The provided bullet points should reflect the novel results and outcome of your research.
Manuscript Structure
The manuscript should be organized to contain the following subsections:
Title, Authors name and affiliations, Abstract, Keywords, Introduction, Material and methods or Theory/calculation/simulations, Results, Discussion, Conclusions, Appendices, Acknowledgments, Funding and References.
You have to organize your article in clearly defined and numbered sections. Title, abstract and references must be excluded from numbering. Subsections should be numbered as 2.1, 2.2, 2.2.1, 2.2.2 etc choosing a brief and proper subsection title. Avoid using more than three levels headings. It is recommended using this numbering for internal cross-referencing in the manuscript text.
Manuscript files must be submitted in Word (or LaTeX) only. Type manuscript text body on consecutively numbered pages of letter size (21.59 cm × 27.94 cm) in double-spaced typing using 12 points Times/Times New Roman font. Respect 2.54 cm margins on top, bottom right and left.
The title should be concise and informative reflecting outline of the work avoiding aberrations and formulas. Use point 14 bold for typing title and restrict its word count to less than 30.
Author names and affiliations
Write complete name and family name of the authors just below the paper title with accurate spalling and separate them by comma. Authors’ affiliation should be given below the names; indicated using alphabetical superscript devoted to each affiliation appeared immediately after the authors' name and in front of the appropriate address. If All authors have the same affiliation address, there is no need for superscript. Affiliation addresses (where the actual work was done) ought to contain full postal address of institution, country name and the e-mail address of each author.
Corresponding author
The corresponding author is responsible for communication with the journal at all stages of the manuscript submission, peer review, publication and post-publication processes. This responsibility includes manuscript correction, handling the revisions, preparing response to reviewer comments, re-submission, proof reading, and answering to the any future queries.
Please indicate clearly which of the authors is corresponding author using * footnote appeared immediately after his/her name. Provide e-mail and his/her contact details including fixed telephone and fax numbers at the footnote.
Present/permanent address
The provided affiliation should indicate the address at which the author actually contributed the work. In the case of moving to new working address a 'Present address' or 'Permanent address' could be mentioned by a footnote to that author's name using superscript Arabic numerals.
The abstract should be written concisely to state factually the purpose of the research, the employed techniques/simulations, the principal results and major conclusions. It is essential that the abstract be standalone. Therefore, it should contain all necessary information avoiding non-standard or uncommon abbreviations and references.
A number of 6 keywords are required. Keyword are important for the information retrieval process. Therefore, they should be selected carefully to reflect the field and main achievements of the work.
In the introduction the authors should explain the rationale behind the current study. This should be performed by summarizing the main achievements in previous relevant research works and highlighting the gaps in knowledge. Therefore, the objective, contribution and novelty of the present research to fill the gap should be briefly and precisely stated. It is recommended avoiding a detailed literature survey, a summary of the results or citing irrelevant references.
Materials and methods (Design/calculation/simulations)
Experimental procedure including designed and conducted process steps and characterizations (design procedure, calculation and simulations steps and details) should be described exactly with sufficient details. A clear and concise justification of the conditions and procedures of the study and the employed analytical tools or methodology are required as well. This ensure reproducing of the same results by an independent researcher. Specify the as-received state of martials, exact involved process steps, the trade mark of the characterization equipment and the relevant standards. To avoid self-plagiarism, summarize the already published methods by including changes and citing references. 
The collected data and analysis should be presented clearly and concisely in the form of popper figures and tables in a logical order i.e. in order of importance. It is proposed using subheadings to separate the results of different experiments. It should be avoided duplicating the data among the figure, tables and text. For experimental measurements it is necessary evaluating the significance and precision of the reported data by performing statistical analysis and reporting 95% confidence intervals or at least standard deviations.
The findings, explored facts and/or mechanisms; presented in the results section, should be discussed in the context of the research questions and objectives. In discussing the obtained results, it should be avoided restricting to simple interpretations. A well composed discussion should explore the broader implications and significance of the achievements. Try to provide recommendations for the direction of future research on the topic. A combined Results and Discussion section also is acceptable. Avoid excessive citations and discussion of published literature.
The outcome of the presented results and discussions should be summarized as the main conclusions of the study. It is recommended that this section be stand-alone avoiding repeating the exactly the same statements in the results and discussion sections. 
Appendices are appeared just after conclusions and all mentioned roles for typesetting the manuscript should be respected as well. The appendices must be indicated with capital A, B, etc. letters. The figures, tables, equations should be numbered separately according to the appendix name for example Fig. A1, Table A1, Eq. (A.1), Eq. (A.2), etc. or Fig. B1, Table B1, Eq. (B.1), Eq. (B.2), and so on.
Math formulae
All math equations and chemical reactions should be typed in separate line in the form of editable text and not as images. Indicate each equation with a number Eq. (1), Eq. (2), etc. Simple or small equations could be inserted in normal text. This requires using “/” and “exp()” instead of small fractional terms and power of e, respectively.
All abbreviations must be defined at their first usage in the manuscript text. It is recommended avoiding abbreviations in the abstract but if essential they must be defined in the abstract itself in their first usage.
Figures and illustrations
  • Illustrations should be numbered according to their sequence in the text using Arabic numerals in the form of Fig. 1, Fig. 2 etc.
  • All Figures and illustrations should be cited in the text.
  • All details (tests, inset, numbers, scales and signs) in the figures and illustrations should readable and understandable in the final printed size.
  • Prepare all figures and illustrations according to the proposed format.
  • Each figure should have proper caption given in the manuscript text not attached to the figure.
  • Avoid including titles or captions within illustration.
  • Denote different parts of figures and illustrations by lowercase letters (a, b, etc.).
  • Figure caption should be concise describing accurately what the figure depicts.
  • Acceptable file format for the figures and illustrations are tiff, jpg and Microsoft Office plotted files.
  • Prepare tiff and jpg formatted illustration with the minimum resolution of 1000 and 600 dpi for the bitmapped and colored images and drawings, respectively.
  • In the original submission, insert figures and illustrations in the manuscript text near paragraph that they have been cited. Place figure captions on below of the figure.
  • For the accepted papers original figures and illustrations are required.
Tables should be prepared as editable text and be placed next to the relevant text in the article. Number tables consecutively in accordance with their appearance in the text. Place table captions on top of the table in the article text and do not attached them to the table. Table notes must be given below the table body. All aberrations should be defined in the article text. The data presented in tables should not be the duplicate of results described in the other illustrations.
Please provide list of references just after appendices numbered in the same order as they appear in the text. Site references by numbers in square brackets; [], in line with the manuscript text. For more than two reference sequentially please cite the first and last one number separated by dash line. You can refer to a reference citing author(s) name followed by the reference number. Avoid referring to unpublished results and personal communications as reference. Every reference cited in the text should be present in the reference list (and vice versa). It is recommended management of references using conventional reference management software products followed by finalizing according to the proposed referencing style. 
Reference style
Example for citing references in the text:
...for both single crystal superalloys for investment casting [23,24].
... examples using similar concepts was later developed by this group [18–20].
… Chookajorn et al. [44] modified GB energies of binary alloys via …
…include mesoporous SiO2 [33,35–39],….
Example for Reference style:
Reference to a journal publication:
[1] Z.H. Cao, W. Sun, Y.J. Ma, Q. Li, Z. Fan, Y.P. Cai, Z.J. Zhang, H. Wang, X. Zhang, X.K. Meng, Strong and plastic metallic composites with nanolayered architectures, Acta Mater. 195 (2020) 240-251.
Reference to a journal publication with an article number:
[2] M. Traversier, P. Mestre-Rinn, N. Peillon, E. Rigal, X. Boulnat, F. Tancret. J. Dhers, A. Fraczkiewicz, Nitrogen-induced hardening in an austenitic CrFeMnNi high-entropy alloy (HEA), Materials Science and Engineering: A 804 (2021) 140725.
[3] R.W. Hertzberg, R.P. Vinci, J.L. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, Fifth Edition, Wiley, New York, 2013.
Reference to a chapter in an edited book:
[4] J.-L. Strudel, Mechanical properties of multiphase alloys, in: R.W. Cahn, P. Haasen (Eds.), Physical Metallurgy, Fourth Edition, Vol. 3, Amsterdam, 1996, pp. 2015–2206.
Reference to a website:
[5] United States - Statistics & Facts, United States' share of global gross domestic product (GDP) adjusted for purchasing power parity (PPP) from 2015 to 2025, https://www.statista.com/statistics/270267/united-states-share-of-global-gross-domestic-product-gdp/, 2021 (accessed 16 January 2021).
Reference to a dataset:
[6] H. Stone, J. Moffat, R. Thompson, T. Edwards, L. Owen, K. Christofidou, A. Goodfellow, N. Jones, J. Kelleher, Interphase load partitioning during deformation of Ni-Cr-Al-Ti-Mo alloys, STFC ISIS Neutron and Muon Source, 2018. https://doi.org/10.5286/ISIS.E.RB1720385.
Journal abbreviations source
Journal names should be abbreviated according to the List of Title Word Abbreviations.
Submission checklist
Before staring submission process please ensure that following files and formations are provided.  
  • Cover latter
  • Novelty statement
  • Highlights
  • Manuscript
  • Tables
  • Figures
  • Suggestion of five potential reviewers with their contact details
Submission declaration and verification
Originality of the research work should be declared obviously upon submission. This means that the submitted work has not been published previously (except in the form of an abstract, a published lecture or academic thesis) and it is not under consideration for publication elsewhere. This should be declared in the cover letter also.  All authors should be agreed after acceptance that it will not be published elsewhere in the same form, in English or in any other language, without the written permission of the AMS journal as copyright-holder.
Plagiarism Policy
The originality of the submitted articles will be checked journal according to the plagiarism policy of the AMS office.
Author contributions
It is highly recommended that individual contributions of the authors be clearly stated in the cover letter.
After Acceptance
proof correction
Before final publication, a paginated PDF file of the paper will be sent to the corresponding author via an email to perform proof corrections. This provide final chance to check and correct the typesetting, editing, completeness and correctness of the text
, tables and figures. This should be performed in one correspondence as carefully as possible, as inclusion of any subsequent corrections cannot be guaranteed. Significant changes to the accepted article for publication will not be permitted at this stage.
Upon acceptance of an article, authors should transfer copyright to AMS via signing the ‘AMS Publishing Agreement’ forms.